There are several steps that you must follow when you want to finish a garage. You should insulate the garage and have the flooring at least seven-and a half feet above the floor. You may also want to add windows to the room to let in more natural light. Check with your local zoning officer to find out how many windows can be added to your garage. There should be at least three to five windows installed.
The first step is to apply drywall to your walls. Drywall is preferred for garage walls. It is easy to put up and has a high fire resistance. If you don't want to deal with drywall, you can use oriented strand board, which is bolted to the wall frame. It does not require any trim or tape, and it is an inexpensive way to finish your garage. After framing the walls, apply primer.
Paint the ceiling. The ceiling can be painted with a spray can or roller. To avoid drips and spillages, use rags. You will need a ladder and two people to hold it up. Remember to get someone to hold the ladder while you paint the ceiling, and to make sure you aren't too short. The ladder should be tall enough so that you can reach the ceiling without straining yourself.
Prepare the wall surface with drywall primer before installing drywall. This will seal the pores in the sheetrock and give your paint a longer life. A primer that is compatible to drywall should be used if you're painting walls. It also makes the paint last longer. The primer can be used to hang shelves and other items on the walls. You can even put up Christmas decorations.
Once you have a plan for how you will finish your garage, it is time to get started. Once you have decided on the materials you will need to begin the preparation of the walls. You must raise the drywall, otherwise it won't look right. Adding drywall is an inexpensive way to finish a garage. However, it is important to carefully follow the instructions.
After you have selected the materials you can begin to finish the walls. Although drywall works well for garage walls and other areas, it is not the best choice. Instead, you can finish the walls with wallboard panels or plywood. These options are easier to install and require less labor. The walls of a garage should be finished with drywall. Besides, the plywood is more durable than drywall, and it will not affect the insulation levels of your home.
FAQ
How many times should I change my furnace's filter?
The answer depends on how often you expect your family to use your home heating system. It is worth changing your filter more often if you intend to spend a lot of time outside during winter months. You may be able wait longer between filters changes if you don't often leave the house.
A furnace filter should last for approximately three months. This means that your furnace filters should be changed every three to four months.
You can also consult the manufacturer's recommendations regarding when to change your filters. Manufacturers recommend changing your filter after each heating season. Other manufacturers suggest waiting until visible dirt builds up.
What should I do first in a house renovation?
Clean out your home and get rid of all clutter. You will need to clean out all moldy areas and repair any leaky pipes. Finally, you'll need to repaint the interior. Finally, you will need to wash the exterior surfaces clean and paint.
Are you better off doing floors or walls?
It is the best way to begin any project. It is crucial to plan how you'll use the space, what people will use it for, and why. This will help to decide whether flooring or wall coverings is best for you.
Flooring may be an option if you are planning to make an open kitchen/living room. Wall coverings are an option if you prefer to keep this space private.
How important it is to be pre-approved for loans?
It's important to be pre-approved for mortgages. This will allow you to determine how much money you can borrow. It also helps you determine whether or not you qualify for a particular loan program.
How can I avoid getting ripped off when renovating my house?
To avoid being scammed, it is essential to fully understand the terms of your contract. Before signing any contract, read through the fine print carefully. You should also not sign any unsigned contracts. Always ask for copies of signed contracts.
Can I do the whole renovation myself?
You can do it yourself so why pay someone when you could save time and money?
It doesn't really matter how much you love DIY. There will always be times when you just can't do it. There may be too many variables involved for you to control.
A qualified electrician would be required to check the safety and reliability of your electrical system if you live in an older house.
It is possible that your renovations might cause structural damage.
You might not have all the necessary tools to do the job correctly. A plumber's snake is an instrument that can be used to unclog pipes.
There are plumbing codes that will require you to hire a licensed plumber for your project.
It is important to understand your capabilities before embarking on such a large task.
Ask your friends and family for help if you're unsure if the job is possible.
They can give you advice on what steps you need to take and where you can go to learn more about the subject.
Statistics
- ‘The potential added value of a loft conversion, which could create an extra bedroom and ensuite, could be as much as 20 per cent and 15 per cent for a garage conversion.' (realhomes.com)
- Rather, allot 10% to 15% for a contingency fund to pay for unexpected construction issues. (kiplinger.com)
- It is advisable, however, to have a contingency of 10–20 per cent to allow for the unexpected expenses that can arise when renovating older homes. (realhomes.com)
- Most lenders will lend you up to 75% or 80% of the appraised value of your home, but some will go higher. (kiplinger.com)
- The average fixed rate for a home-equity loan was recently 5.27%, and the average variable rate for a HELOC was 5.49%, according to Bankrate.com. (kiplinger.com)
External Links
How To
How do you plan a complete home remodel?
Planning a home remodel takes planning and research. Before you begin your project, there are many things to think about. First, you must decide what type of home improvement you want. There are many options available, including kitchen, bathroom and bedroom. Once you know which category you would like to work on, you'll need to figure out how much money you have available to spend on your project. If you are new to working in homes, budget at least $5,000 for each room. If you have experience, you may be able to manage with less.
Once you know how much money your budget allows you to spend, then you will need to decide how big a job it is you are willing to take on. A small kitchen remodel will not allow you to install new flooring, paint the walls, or replace countertops. You can do almost everything if you have enough cash for a full-scale kitchen renovation.
Next, look for a contractor with experience in the type or project you are looking to tackle. This will ensure you get quality results and save you a lot of hassle later. Once you have found a reliable contractor, it is time to start gathering supplies and materials. You may need to purchase everything from scratch depending on the size and scope of your project. You shouldn't have any trouble finding the right item in pre-made stores.
Now it's time for you to start planning. First, you'll want to draw up a rough sketch of where you want to place furniture and appliances. The next step is to design the layout of the rooms. Remember to leave enough space for outlets and plumbing. Visitors will be able to easily reach the areas that are most frequently used near the front doors. The final step in your design is to choose colors and finishes. Keep your designs simple and in neutral tones to save money.
Now it's time to build! Before you start any construction, be sure to check the local codes. Some cities require permits. Others allow homeowners to build without permits. Before you can begin construction, remove any walls and floors. Next, you'll lay down plywood sheets to protect your new flooring surfaces. You will then attach or nail pieces of wood together to make the cabinet frame. Finally, attach doors to the frame.
There will be some finishing touches after you are done. You'll likely want to cover any exposed wires and pipes. You will need to use tape and plastic sheeting for this purpose. Also, you will need to hang mirrors or pictures. Just remember to keep your work area clean and tidy at all times.
These steps will help you create a functional, beautiful home that is both functional and attractive. You now have the knowledge to plan a complete house remodel.